Borehole Triaxial Geophone 10Hz ( Borehole 3C geophone 10Hz) is mainly used to receive seismic waves in the borehole well. The triaxial geophone is equipped with three high-sensitivity 10hz geophone sensors arranged in Cartesian coordinates, which can receive seismic signals in three directions simultaneously. The borehole triaxial geophone adopts a torsion spring and electromagnetic well lock device, which is suitable for borehole drilling with diameter 60mm to 160mm (The maximum drilling diameter can up to 200mm by adjusting position of the adjusting screw).
The Borehole Triaxial Geophone 10Hz cable output end can be welded connectors or be kept open as per clients’ requirements, When welding an NK2721C connector, pin 1/2 is the vertical component, pin 3/4 and pin 5/6 are the horizontal component (the single number is the positive pole and even number is negative pole). When welding split clips in the color of red, blue and yellow, the red clip is a vertical component, and the other two clips are horizontal components ( For each split spring clip, the wide plate is a positive pole, and the narrow plate is a negative pole).
|Natural Frequency (Hz)||10±5%|
|Borehole Well Diameter(mm)||Φ60～Φ160|
|Cable length||50m, 60m, 100m or 120m optional.|
|Connector Type||NK2721C, Split Spring Clips or Free Cable End optional.|
|Max.Tilt Angle(Angle from the axial direction of the Probe)||＜20°.|
|– All the parameters are specified for each channel at 20℃(±2℃).|
|– 1 year limited warranty exclusive of high voltage, lightning or physical abuse.|
– Other types of geophones are also available: SM-4 Equivalent, SM-24 Equivalent, SG10 Equivalent, GS-20DX Equivalent, GS-32CT Equivalent, GS ONE Equivalent, 1Hz, 2Hz, 2.5Hz, 3Hz, 4Hz, 4.5Hz, 5Hz, 8Hz, 14Hz, 15Hz, 28Hz, 30Hz, 38Hz, 40Hz, 60Hz,80Hz and 100Hz.