Ordinary Split Plate Clip Take-out TKO is widely used on seismic cable and ert cable for data transmisstion to seismographs, data loggers and IP instruments.
Molded Split Spring Connector Take-out TKOs are widely applied on seismic cables, ip resistivity cables and ert cables for data transmission to seismographs, recorders and data loggers.
Mueller Clip Take-out is the most widely used cable take-out / electrtode on seismic cable, ERT cable and other earth resistivity survey cables.
Contact with us and get more detailed information.
Kooter take-out tko is a waterproof type cable take-out which is widely used on seismic cables and geophone land streamers.
KCK Take-out TKO is a waterproof type cable take-out which is applied on various standard seismic cables and customzied seismic cables.
Encapsulated Vulcanization Resistivity Electrode Take-out is specialized designed for borehole resistivity cables and passive multi-electrode cables.
Load bearing end is molded at the end of borehole resistivity electrode cable or hydrohpone cable streamers to increase the overall weight of the main device.
● Rugged Structure with streamlined design.
● A metal ring is attached at the end of the load bearing device.
● Portable to attach any desired weight loader to increase the overall weight of the borehole resistivity cable or 3 / 12 / 24/ 48 hydrophone cable streamer.
● An ideal part for seismic survey or borehole resistivity measurements in vertical direction.
● Widely used in downhole well, river, lake,submarine and etc.
ST series submarine hydrophone cable streamer is designed for seismic refraction surveys at longitudinal (P-) waves. The hydrophone modules utilize high sensitive piezoceramic sensors. The default number of modules on the hydrophone cable is 12 or 24, but it can vary from 1 to 48. The standard interval between hydrophone and the lead-in cable length at the end is 10m, 20m but can vary upon client’s requests.
● Compatible with all main stream seismographs and data loggers: Geometrics Geode 24, Strata Visor, SUMMIT, PASI GEA 24, DSS Cube /Omnirecs Data Cube 3, etc.
●Channel Number:1 channel, 3 channel, 12 channel, 24 channel, 48 channel or customized modules upon client’s requests.
●Hydrophone 4Hz, Hydrophone 5Hz, Hydrophone 10Hz or Min Hydrophone optional.
● Hydrophone Interval: 1m, 3m, 5m, 10m or customized hydrophone interval upon client’s requests.
● Lead-in Cable length: 50m,100m or customized length upon client’s requests.
● Cable Capacity: 6.5mm – 12.0mm OD.
●Cable Connector: 10 pin connector, 26 pin connector, 27 pin connector, 32 pin connector, 50 pin connector, 55 pin connector or 61 pin connector optional.
Click here and download Wiring Sketch for a typical ” 24 channel submarine hydrophone cable streamer” or contact us and get more detailed information.
408ULS Cables are developed for marine and TZ (Transition Zone) use with maximum water depth 50m. With the model of 408ULS LCK2F Style Cable and 408ULS Style Transverse Cable available.
● For Shallow Water and Transition Zone Field.
● Cable Length 60m/550m optional.
● Maximum Working Depth 50m.
● Light Weight and Easy Deployment.
● Cable OD 14mm with Cable Conductor 7quad and Twisted.
● Reinforced with Aramid Braid with Tensile Strength 500daN.
● With Net Weight 210kgs /km.
● Fully Compatible with 408UL and 428XL Acquisition Systems.
Click here and download data sheet for 408ULS cables or contact with us and get more detailed information.
ST series multi electrode borehole resistivity cable is designed for signal transmission in well logging and it is widely used in hydropower, coal mine, oil and gas well, construction engineering and other fields.
● Adapted for hazard working conditions and frequent deployment.
●Strong wear resistance, cold resistance and good insulation performance.
●Mechanical performance, electrical performance and waterproof performance have been tested by professional laboratory and proved by clients.
●Specialized Encapsulated Vulcanization Electrode Take-out is applied, by which the cable Jacket and Metal Parts are tightly bonded by filling Vulcanized Compound with Encapsulated Mounds.
● Guaranteed Glue Setting Time with Longer Production.
● Theoretically Working depth 6000m+ and Laboratory tested 7Mpa approved.
● Ideal Choice for Borehole Resistivity Investigations.
● Custom Electrode take-out shape, interval and length are available upon client’s requests.
Click here and download data sheet of borehole resistivity cables.
AB Cable for VES is used for connecting the A.B electrodes in resistivity exploration, which is suitable for resistivity surveys in geology, hydropower, coal& mineralization prospecting, transportation, construction engineering, natural disaster assessment, archaeological investigation and other fields.
●Small DC resistance, big load current and good insulation performance.
●High mechanical strength, high tensile strength and good waterproof performance.
● For double-layer wires, the inner layer is insulation material with the outer layer fabricating by special materials as sheath and there are high tensile strength materials between inner layer and outer layer.
● Working temperature ranges from – 40℃ to 70℃.
● MN Cable is also available.
Click here and download data sheet of Electrical Resistivity (AB) Wires.
Seis Tech supplies various geophone leader wires with assorted configurations:
● Number of Cable Conductor: 2 core, 3 core.
● Cable Outer Diameter typically in inches i.e.0.180”,0.210”,0.250” and 0.310”.
● “ F” indicates that the Cable is filled with water blocking gel.
● Part Number indicates : Brand Short Name – Conductor – Break Strength (lbs.) – Outer Diameter (in.)
● Molded Polyurethane D-loops / Poly Loose D-Loops / Metal D-loops optional.
Click here and download data sheet of geophone leader wires.
