Month: July 2025

Categories
Geophone Connectors

Kooter Geophone Connector ( Female / Male)

kooter connector

Kooter Geophone Connectors in the styles of single female connector single male connector and dual female&male connector are available. Contact with us to get special discounts !

  • Compatible with KCL connectors and MP-16 connectors.
  • Push-pull fit.
  • UV stabalised&Impact resistant material.
  • Excellent Break Strength in rugged field conditions.
  • Moulded on 4.6mm, 5.3mm, 6.4mm or 7.8mm diameter cable.
  • Sinlge Male/ Female connector with 1 set of male (banana) & female contacts. Replaceable male contact version also available.
  • Male Connector attached with Female dust cap and Female Connector attached with Male dust cap.
  • Paralleling connector with 2 sets of male (banana)&female contacts. Replaceable male contact version also available.
  • Suitable temperature range: -40℃ to +70℃.
Categories
Geophone Connectors

Herma IV Marsh Geophone Cable Connector

herma 4 connector

Herma IV Marsh Geophone Cable Connectors with 4.6mm,5.3mm,6.4mm and 7.8mm cable boots are available. Mostly widely used cable boots are 5.3mm and 6.4mm waterblocked marsh geophone cable.

  • Fitted with dust cap.
  • Excellent breaking strength in rugged field conditions.
  • Threaded coupling ring assures mating with its counterpart.
  • Gold plated  pins for corrosion proof and less contact resistance.
  • Impact modified polyers applied in molding to improve break strength of connector components.
  • Operating Temperature Range: -40℃ to +70℃.
Categories
Geophone Connectors

Amphib IV Marsh Geophone Connector

amphib iv marsh geophone connector

Amphib IV Marsh Geophone Connectors with 4.6mm,5.3mm,6.4 and 7.8mm cable boots are available. Mostly widely used cable boots are 5.3mm and 6.4mm water blocked marsh geophone cable.

  • Fitted with dust cap.
  • Excellent breaking strength in rugged field conditions.
  • Threaded coupling ring assures mating with its counterpart.
  • Gold plated pins for corrosion proof and less contact resistance.
  • Impact modified polyers applied in molding to improve break strength of connector components.
  • Operating Temperature Range: -40℃ to +70℃.
Categories
Geophone Connectors

Muller Clip with Y Mold

mueller clip with y mold

Bulk Muller Clip with Y-Mold are available in inventory. With BU-27CG Style Narrow Clip partnering with BU-29-0 Black Insulator as Negative Pole and BU-27CGW Wide Clip partnering with BU-29-2 Style Red Insulator as Positive Pole in Seismic Data Acquisition.

  • Narrow Clip partnering with Black Insulator for Negative Pole.
  • Wide Clip partnering with Red Insulator for Positive Pole.
  • Insulator: PVC material with length 3.5″(88.9mm).
  • Standard cable tail 1m and customized cable legnth is available upon client’s requests.
Categories
Geophone Connectors

Mueller Clip

mueller clips

Bulk Mueller Clip is available in inventory. With BU-27CG Narrow Clip partnering with BU-29-0 Black Insulator and BU-27CGW Wide Clip partnering with BU-29-2 Red Insulator.

  • Narrow Clip partnering with Black Insulator for Negative Pole in seismic data acquistion.
  • Wide Clip partnering with Red Insulator for Positive Pole in seismic data acquistion.
  • Could also be used as Cable to Electrode Jumper in resistivity imaging.
  • Insulator: PVC material with length 3.5″(88.9mm).
Categories
Geophones Sensors & Elements

SM-4 Equivalent Geophone Sensor

SM-4 Equivalent Geophone

The SM-4 equivalent geophone sensor (ST-8N/ST-10N/ST-14N/ST-28N/ST-40N/ST-60N/ST-100N) is designed for low weight, long field-life,and ultra reliable performance.Precision engineered components and computerized test equipment ensure consistency in manufacture and operation throughout and beyond the limited replacement guarantee period of three years.

● Precision machine, rotating coil design.

● Precious metal contacts for consistent reliable &prolonged field performance.

●Choice of three standard natural frequencies (8Hz, 10Hz,14Hz,28Hz,40Hz,60Hz and 100Hz).

● Vertical and Horizontal elements available for 3-C applications.

● For 2-D and 3-D seismic exploration with bandwidth from 10Hz up to 190Hz.

● 1-year limited warranty on basic element exclusive of high voltage, lightening or physical abuse.

Click here and download data sheet of SM-4 equivalent geophones. Or contact us to get special discounts.

Categories
System Connectors

Bendix 61 Pin Connectors

bendix 24-61s connector

Bendix 61 pin connectors (equivalent ) are available in inventory. Contact with us and get special discounts !

● Cable Capacity- 6.5mm to 12.0mm OD.

● Easy field maintenance.

● Impact resistant material.

●Cable entry kit prevents rotational twist to conductors inside connector.

● Cable anchor to avoid stress on solder joints.

● Female Connector(24-61S) and Male Connector(24-61P) are available.

● Back to Back male connector used to connect two cables with 61 pin female refraction cable connectors.

● Fitted with dust cap.

● Operating temperature range: -40ºC to +70ºC.

Click here and download drawing for Bendix 24-61S Female equivalent Connector  or contact us to get special discounts.

Categories
Three Component Geophones

Three Dimensional Geophone ( 3D Geophone )

three directional 3d geophone

Three Dimensional Geophone (3D Geophone) is a type of electromechanical conversion device. Inside of the 3D geophone, three mutually perpendicular geophone elements are arranged in Cartesian coordinates, which means that the vertical geophone element is Z direction, the east direction horizontal geophone element is X direction, and the north direction horizontal geophone element is Y direction, by which the Seismic signals in the three directions of X, Y and Z will be taken simultaneously and converted into electrical signal outputs.

ST Series 3D geophones are fully compatible with deep seismographs in deep seismic exploration. Also they are the ideal choice for natural earthquake prediction and detection, pulsating micro seismic measurement of bridges& highways, and other applications of low frequency seismic investigations.

●High sensitivity, low distortion, good consistency, good linear response, and reasonable damping coefficient.

●Rugged structure, good sealing and excellent waterproof performance.

● Horizontal adjustment device and direction indicator equipped.

● Waterproof Metal Case, 3Nos. of Adjusting Screws, 7-Pin Socket and 10 meters of leading out cable are equipped.

● Geophone Type: 2Hz, 2.5Hz, 4Hz, 4.5Hz, 10Hz, 15Hz, 28Hz, 30Hz, 38Hz, 40Hz, 60Hz and 100Hz are available.

Click here and download the Sketch for 3D geophones or contact us and get more detailed information.

Categories
System Connectors

KPT55 Pin Connectors

amphenol 22-55s connector

KPT55 Pin Connectors (22-55S and 22-55P equivalent Field Installable Connector Assy) are Available. Contact with us and get special discounts !

● Cable Capacity: 6.5mm to 12.0mm OD.

● Easy field maintenance and water proof.

● Impact resistant material with light weight suitable for rugged field conditions.

● Fitted with dust cap.

● Operating temperature range: -40ºC to +70ºC.

Click here and download drawing for KPT55 Pin  Female (22-55S equivalent) connector or contact us and get more detailed information.

Categories
Three Component Geophones

EPS Portable Digital Seismometer

digital seismometer

EPS portable digital seismometer is a stand-alone and broadband seismometer. It is no need to lock the pendulum or adjust pendulum position, and the transfer function is very stable. EPS digital seismometer is embedded with three-component geophone sensors, high-sensitivity Beidou +GPS module, electronic compass, attitude sensor, bluetooth module and rechargeable lithium battery, which enable the seismometer could continuously work for over 20 days without any external power supply. EPS digital seismometer owns the functions of timed power-on acquisition, timed power-off after acquisition, or continuous data acquisition. It adopts USB, RS232, Bluetooth and other interactive work mode and data will be automatically stored locally.

EPS portable digital seismometer owns the features of Beidou +GPS timing, geographical location positioning, independently long time working, low-power consumption and etc. It is very suitable for unattended long period timing observation, natural micro seismic surface wave exploration and broadband seismic observation in different fields. The frequency response range for EPS portable seismometer could be more than 200Hz, which affords the requirements of artificial seismic sounding and transient surface wave exploration.

Main Functions:

  • Traditional seismic exploration and seismic station prediction system.
  • Transient multi-point Rayleigh wave exploration.
  • Civil engineering inspection.
  • Blasting vibration monitoring.
  • Long time micro seismic measurement in field.

Applications:

  •  Earthquake Monitoring System.
  •  Foundation Engineering.
  • Hydraulic Investigation and electric power exploration.
  • Bridge Engineering Inspection.

Frequency Response:

  • EPS-1:  1s～400Hz.
  • EPS-2:  5s～200Hz.
  • EPS-3:  10s～200Hz.

Click here and download profile of EPS portable seismometer or contact us to get special discounts.

Categories
Three Component Geophones

Three Component Geophone (3C Geophone)

Three Component Geophone

Three component geophone is kind of land cased geophone to perform HVSR,MASW and vibration analysis, with features of robust, light weight and convenient for field operation. One vertical and two horizontal high-precisions geophone sensors are properly coupled and mounted in a robust waterproof 3C case which equipped with 75mm steel spikes. 3C geophone string is widely adopted in underground water surveys, geological stratigraphy, landslide studies, pile foundation detecting, subsoil cavities detection, mining, archaeology, etc.

Three component geophone ranging from 4.5hz to 100hz are available. With KCK connector, KCL connector, 408 connector, Kooter connector, MP16 connector, Split spring connector or Mueller clip connector optional.

Detailed three component geophone selectable are as follows: 3C geophone string 4.5hz, 3C geophone string  5hz, 3C geophone string 8hz, three component geophone string 10hz, three component geophone string 14hz, 3C geophone string 28hz, 3C geophone string 40hz, 3C geophone string 60hz and 3C geophone string 100hz.

SM-6 B coil 4.5hz equivalent geophone(ST-4.5N), SM-4 equivalent geophones (ST-8N,ST-10N,ST-14N,ST-28N,ST-40N and ST-100N),SM-24 10hz equivalent geophone(ST-10PN), 20DX geophones(ST-20DX 8hz, ST-20DX 10hz,ST-20DX 14hz, ST-20DX 28hz, ST-20DX 40hz and ST-20DX 100hz), 32CT equivalent geophone(ST-32CT),SG10 equivalent geophone (ST-10PG) are also available.

Click here and download Wiring Diagram for “4.5Hz three component geophone with Mueller Clips” or contact us and get more detailed information.